Prediction of Long-Term Treatment Response to Selective Serotonin Reuptake Inhibitors (SSRIs) Using Scalp and Source Loudness Dependence of Auditory Evoked Potentials (LDAEP) Analysis in Patients with Major Depressive Disorder

Background: Animal and clinical studies have demonstrated that the loudness dependence of auditory evoked potentials (LDAEP) is inversely related to central serotonergic activity, with a high LDAEP reflecting weak serotonergic neurotransmission and vice versa, though the findings in humans have been less consistent. In addition, a high pretreatment LDAEP appears to predict a favorable response to antidepressant treatments that augment the actions of serotonin. The aim of this study was to test whether the baseline LDAEP is correlated with response to long-term maintenance treatment in patients with major depressive disorder (MDD). Methods: Scalp N1, P2 and N1/P2 LDAEP and standardized low resolution brain electromagnetic tomography-localized N1, P2, and N1/P2 LDAEP were evaluated in 41 MDD patients before and after they received antidepressant treatment (escitalopram (n = 32, 10.0 ± 4.0 mg/day), sertraline (n = 7, 78.6 ± 26.7 mg/day), and paroxetine controlled-release formulation (n = 2, 18.8 ± 8.8 mg/day)) for more than 12 weeks. A treatment response was defined as a reduction in the Beck Depression Inventory (BDI) score of >50% between baseline and follow-up. Results: The responders had higher baseline scalp P2 and N1/P2 LDAEP than nonresponders (p = 0.017; p = 0.036). In addition, changes in total BDI score between baseline and follow-up were larger in subjects with a high baseline N1/P2 LDAEP than those with a low baseline N1/P2 LDAEP (p = 0.009). There were significantly more responders in the high-LDAEP group than in the low-LDAEP group (p = 0.041). Conclusions: The findings of this study reveal that a high baseline LDAEP is associated with a clinical response to long-term antidepressant treatment.     

轴对称弹体非定常空泡流数值仿真

在水下弹体空泡优化建模的研究中,由于弹体水下运动过程中生成的空泡形态及特性,直接影响弹体出水时的表面冲击载荷及空中弹道的稳定性,最终决定射弹打击目标的准确性.为研究弹体水下变减速运动过程中的空化现象,利用FLU-ENT的自然空化模型与动网格技术,对水下轴对称弹体的非定常空泡流进行模拟计算.结果显示,弹体在变减速运动过程中所形成空泡的主体尺寸变化规律与SCAV软件一致,非定常空泡的长度和最大直径均随着自然空化数的增加呈现先增后减的变化趋势;在初始速度一定情况下,质量越大的弹体运动速度衰减越慢,同一空化数下所形成空泡的尺寸越大.     

Fluidic origami with embedded pressure dependent multi-stability: a plant inspired innovation

Inspired by the impulsive movements in plants, this research investigates the physics of a novel fluidic origami concept for its pressure-dependent multi-stability. In this innovation, fluid-filled tubular cells are synthesized by integrating different Miura-Ori sheets into a three-dimensional topological system, where the internal pressures are strategically controlled similar to the motor cells in plants. Fluidic origami incorporates two crucial physiological features observed in nature: one is distributed, pressurized cellular organization, and the other is embedded multi-stability. For a single fluidic origami cell, two stable folding configurations can coexist due to the nonlinear relationships among folding, crease material deformation and internal volume change. When multiple origami cells are integrated, additional multi-stability characteristics could occur via the interactions between pressurized cells. Changes in the fluid pressure can tailor the existence and shapes of these stable folding configurations. As a result, fluidic origami can switch between being mono-stable, bistable and multi-stable with pressure control, and provide a rapid ‘snap-through’ type of shape change based on the similar principles as in plants. The outcomes of this research could lead to the development of new adaptive materials or structures, and provide insights for future plant physiology studies at the cellular level.     

Managing readiness-relevant activities for the organizational dimension of ERP implementation

An organization requires performing readiness-relevant activities to ensure successful implementation of an enterprise resource planning (ERP) system. This paper develops a novel approach to managing these interrelated activities to get ready for implementing an ERP system. The approach enables an organization to evaluate its ERP implementation readiness by assessing the degree to which it can achieve the interrelated readiness relevant activities using fuzzy cognitive maps. Based on the interrelationship degrees among the activities, the approach clusters the activities into manageable groups and prioritizes them. To help work out a readiness improvement plan, scenario analysis is conducted.     

Mechanical properties of a self-healing fibre reinforced epoxy composites

Inspired by biological systems in which damage triggers an autonomic healing response, a polymer composite material that can heal itself when cracked has been developed. In this work, compression and tensile properties of a self-healed fibre reinforced epoxy composites were investigated. Microencapsulated epoxy and mercaptan healing agents were incorporated into a glass fibre reinforced epoxy matrix to produce a polymer composite capable of self-healing. The self-repair microcapsules in the epoxy resin would break as a result of microcrack expansion in the matrix, and letting out the strong repair agent to recover the mechanical strength with a relative healing efficiency of up to 140% which is a ratio of healed property value to initial property value or healing efficiency up to 119% if using the healed strength with the damaged strength.     

Fracture surface evolution and apparent delamination toughness in split composite beam specimens subjected to mixed mode I–III loading

The influence of specimen twisting during global anti-plane shear loading in composite split beam specimens is studied. Tests were conducted on specimens with different thicknesses and delamination lengths to produce different amounts of specimen twisting prior to fracture. It is shown that specimen twisting causes mode I stresses to develop, thereby producing mixed mode I–III conditions along the delamination front. This causes near-tip transverse cracks to initiate, prior to delamination advance, at an orientation related to the mode mix. Unlike in homogeneous materials, transverse crack extension is accompanied by planar delamination advance, and transverse crack rotation during extension is restricted by the laminate’s fibers. The overall fracture surface evolution is therefore strongly controlled by specimen geometry. The influence of these findings on the apparent delamination toughness as obtained from composite split beam and other types of mode III tests is discussed.     

Top illuminated organic photodetectors with dielectric/metal/dielectric transparent anode

The top illuminated organic photodetectors (OPDs) with a Dielectric/Metal/Dielectric (DMD) transparent anode are fabricated. The transparent electrode is composed of molybdenum trioxide (MoO₃)/silver (Ag)/MoO₃ layers and zinc oxide (ZnO)/aluminum (Al) is used for bottom cathode. The optimized DMD electrode has an optical transmittance of 85.7% at the wavelength of 546 nm and sheet resistance of ∼6 Ω/sq. The fabricated OPDs exhibit a high detectivity and wide range linearity.     

Computational studies on the radiative and nonradiative processes of luminescent N-heteroleptic platinum(II) complexes

Three N-heteroleptic Pt(II) complexes, [Pt(C^C)(O^O)] [O^O = acetylacetonate, C^C = 1-phenyl-1,2,4-triazol-5-ylidene (1), C^C = 4-phenyl-1,2,4-triazol-5-ylidene (2), C^C = 2-phenylpyrazine (3)] have been investigated with density functional theory (DFT) and time-dependent density functional theory (TDDFT). The radiative decay rate constants of complexes 1–3 have been discussed with the oscillator strength (f_n), the strength of spin–orbit coupling (SOC) interaction between the lowest energy triplet excited state (T₁) and singlet excited states (S_n), and the energy gaps between E(T₁) and E(S_n). To illustrate the nonradiative decay processes, the transition states between triplet metal-centered (³MC) and T₁ states have been optimized and were verified with the calculations of vibrational frequencies and intrinsic reaction coordinate (IRC). In addition, the minimum energy crossing points (MECPs) between ³MC and ground states (S₀) were optimized. At last, the potential energy curves relevant to the nonradiative decay pathways are simulated. The results show that complex 3 has the biggest photoluminescence quantum yield because the complex 3 has the biggest radiative decay rate constant and the smallest nonradiative decay rate constant in complexes 1–3.     

A novel method for estimating the track-soil parameters based on Kalman and improved strong tracking filters

A tracked vehicle has been widely used in exploring unknown environments and military fields. In current methods for suiting soil conditions, soil parameters need to be given and the traction performance cannot always be satisfied on soft soil. To solve the problem, it is essential to estimate track-soil parameters in real-time. Therefore, a detailed mathematical model is proposed for the first time. Furthermore, a novel algorithm which is composed of Kalman filter (KF) and improved strong tracking filter (STF) is developed for online track-soil estimation and named as KF–ISTF. By this method, the KF is used to estimate slip parameters, and the ISTF is used to estimate motion states. Then the key soil parameters can be estimated by using a suitable soil model. The experimental results show that equipped with the estimation algorithm, the proposed model can be used to estimate the track-soil parameters, and make the traction performance satisfied with soil conditions.     

Validation of performance of real-time kinematic PPP. A possible tool for deformation monitoring

Structural failures (bridge or building collapses) and geohazards (landslides, ground subsidence or earthquakes) are worldwide problems that often lead to significant economic and loss of life. Monitoring the deformation of both natural phenomena and man-made structures is a major key to assessing structural dynamic responses. Actually, this monitoring process is under real-time demand for developing warning and alert systems.One of the most used techniques for real-time deformation monitoring is the Global Navigation Satellite System (GNSS) real-time procedure, where the relative positioning approach, using a well-known reference station, has been applied.This study was conducted to evaluate the actual quality of the real-time kinematic Precise Point Positioning (PPP) GNSS solution for deformation monitoring, where it can be concluded that a promise tool is under development and should be taken into account on actual and near future real-time deformation monitoring studies and applications.